Rocker's Woodwork

2011-10-11T22:50:00.000-07:00

2007-05-11T19:57:00.000-07:00

This zigzag table is built of jarrah, using Domino joinery.
The 22.5° mitres have an alignment domino and a
through locking tenon.

The resulting joints are easily strong enough to
support my weight.

A bow-fronted hall table in jarrah

2007-05-01T10:56:00.000-07:00

I built this hall table a few years ago, using a design
devised by my friend Mark. You can build one like it,
if you download the descriptive article.

Descriptive article

2007-04-30T14:08:00.000-07:00

Here is a 3D model of my zigzag chair with Domino-reinforced mitre joinery, created in Alibre Design. If you download the image file and then view it using Adobe Reader 8 (not earlier versions), you can view the model model from any angle, by left-clicking on the image, and then holding down the left mouse button and dragging to rotate the model to any desired orientation. An article describing how to build the chair with domino joinery is published in the current issue of Woodcraft Magazine.

Download image file

Crosscut sled

2007-04-28T15:01:00.000-07:00

Crosscut sled article

CD cabinet

2007-04-27T17:48:00.000-07:00

Descriptive article

Zigzag chair with bridle joints

2007-04-26T22:12:00.000-07:00

A cantilevered dining chair with bridle-joint joinery;
An article on a similar chair which has
mitre joints that are reinforced with pinned locking
tenons epoxied into mortices milled with a Domino
tenon joiner is now online on the FestoolUSA website. The latter chair is described in an article
in the current issue (May '07) of Woodcraft Magazine.

Descriptive article

Jigs

2007-04-25T22:46:00.000-07:00

To download an article in .PDF format on any of these jigs,
you can click on its caption.

Morticing Jig

Morticing jig (lite)

Table-saw tenoning jig

Box-joint jig